Home/Floor Maintenance/Shower slip treatment
Bathrooms ยท Slip treatment

Shower slip treatment for existing showers, baths and bathroom floors.

A non slip shower treatment, non slip bath treatment or bathroom floor slip treatment applied to the surface you already have. Premrest assesses the shower, bath or tiles and recommends a coating, a suitable tile treatment, or a thorough clean where residue is the problem.

Need the floor measured first? See slip resistance testing.

Need coatings for other floors as well? See non-slip floor coatings and treatments.

Need urgent help or confirmation? Text 0480 855 665. Phone and SMS are monitored 24/7.

Make a slippery shower, bath or bathroom floor safer to use.

Wet tiles, a glazed shower base or a smooth bath are common places to lose footing. This page is for people who want the bathroom they already have made less slippery: older people, people with mobility or balance concerns, their families and carers, and NDIS participants.

Premrest applies a non-slip coating or an anti-slip treatment to existing shower bases, baths and bathroom floor tiles where a suitable system is available. You do not need to replace sound tiling to ask for an assessment. If soap scum, detergent film or other residue is masking the texture the surface already has, a deep clean may be the first step.

The same work sits in homes and in commercial bathrooms. Premrest also slip-tests residential floors such as tiled alfresco areas, pools and new homes, so a house shower, bath or bathroom floor can be measured as well as treated.

Anti slip coating, tile treatment or a deep clean.

Coatings

Non-slip coating for showers and baths

Add a slip-resistant layer to a compatible existing shower base, bath or bathroom floor. Clear coating options can keep the underlying surface visible, although sheen and texture may change. We select the system and preparation for the substrate, wet use and cleaning needs.

Etching

Anti-slip treatment for shower tiles

A treatment that changes the surface texture of suitable tiles rather than adding a coating. We assess compatibility and trial the finish where appropriate. Etching is not suitable for every material and can affect appearance, especially on polished or acid-sensitive surfaces.

Cleaning

When residue is the slippery bit

Soap film, detergent and embedded soil can reduce traction in a shower or on bathroom tiles. Thorough cleaning may restore grip where contamination is the cause. If cleaning is enough, that is what we recommend; if it is not, we scope the appropriate coating or treatment.

Product-agnostic systems for wet bathrooms.

Premrest is not tied to one brand. We recommend a system for the job, with options from specialist ranges already used on slippery floors, and anti-slip etching treatments. The specific product, preparation and finish depend on your shower, bath or bathroom floor.

SWISS GriP

Water-based polyurethane non-slip coatings, including transparent finishes. The maker publishes bathroom and shower coatings for floors, shower trays and baths. A coating option for compatible surfaces where additional grip is needed without etching the underlying material.

Stellmann

Clear polyurethane non-slip coatings that add texture over the existing surface. The maker publishes coatings for showers, bathroom floors and related wet areas. We assess adhesion, the required finish and maintenance needs before specifying a system.

Dr. Schutz

Floor coating systems with compatible anti-slip additives, including options for resilient flooring. Product selection depends on the floor covering and existing finish.

Actichem NeverStrip

Specialist floor coating and surface treatment options. NeverStrip Tile Seal is a thin-film treatment for compatible ceramic, porcelain and brick floors. We assess the selected product against the site's slip-resistance and maintenance requirements.

Anti-slip tile etching

An etching treatment that changes the surface texture of suitable tiles rather than adding a coating. We assess compatibility and trial the finish where appropriate; etching is not suitable for every material and can affect appearance on polished or acid-sensitive surfaces.

Product specifications help guide selection. The result on your shower or bathroom floor also depends on preparation, application, conditions and ongoing cleaning. We verify the treated surface rather than promising the same slip rating for every bathroom. You do not need to choose a brand before you enquire.

Ask us which system suits your bathroom

Older people, carers and NDIS participants.

A bathroom slip treatment for elderly relatives, or for someone who is unsteady on wet tiles, is often about keeping the room they already use. Families and carers can send photos, the address and a short note about the shower, bath or bathroom floor. Premrest confirms scope and price before work begins.

NDIS bathroom slip treatment can suit participants who need their bathroom made safer. If you have a plan, talk to your plan manager or support coordinator about whether this work can sit in it. Premrest does not promise that the work will be funded.

Premrest is IICRC accredited. Work is quoted after an assessment of the surface, access and any testing you want before or after treatment.

What rating a wet bathroom is meant to hit.

Existing pedestrian surfaces are tested on site to AS 4663. New materials are classified to AS 4586. Results are read against SA HB 198:2014, which is guidance rather than a legal checklist. Wet pendulum results are P0 to P5.

The handbook recommendations that sit closest to this work are: P3 for toilets in offices, hotels and shopping centres; P2 for hotel apartment bathrooms, ensuites and toilets; P3, with a barefoot classification of B, for bathrooms and ensuites in hospitals and aged care; and P4 for communal shower rooms. A house shower does not have its own row in that table. The useful step is to measure the surface you have, treat it if needed, and measure it again.

Premrest can run on-site slip resistance testing before treatment, after treatment, or both. Our guide to slip rating requirements for commercial floors sets out the HB 198 numbers for wet areas in more detail. Broader commercial floors sit on the slip rectification page.

From bathroom assessment to treatment and retesting.

  1. Assess and specify. Review the shower, bath or bathroom floor, how it gets wet, and any existing slip-test report. Use on-site testing where you want a number, then recommend cleaning, a coating or a suitable treatment.
  2. Prepare and apply. Confirm the scope, preparation, finish and access plan. Allow the selected system's required drying or curing time before returning the bathroom to use.
  3. Retest and maintain. Carry out post-treatment pendulum testing to AS 4663 where it is part of the job, and explain the cleaning needed to preserve the result.

Shower slip treatment across Australia.

Premrest serves sites across Australia. Crews work in Melbourne, Sydney and Brisbane. Perth and WA are by arrangement. Tell us the address and what needs treating so we can confirm access, scheduling and the appropriate system.

Shower, bath and bathroom floor questions.

Can you treat a slippery shower without replacing the tiles?

Often, yes. A suitable non-slip coating or anti-slip tile treatment can improve grip on a sound existing shower base or tiled bathroom floor. If soap film or residue is the cause, deep cleaning may be enough. Premrest assesses the surface first. Damaged, leaking or unsuitable surfaces may need a different approach.

What is the difference between a non-slip coating and etching in a shower?

A coating adds a slip-resistant layer over the existing surface. An etching treatment changes the texture of compatible tiles rather than adding a coating. Suitability, appearance, cleaning needs and the existing finish decide which approach is appropriate. Etching is not suitable for every material.

Which anti slip coating do you use on showers?

There is no single best product for every shower, bath or bathroom floor. Premrest considers SWISS GriP, Stellmann, Dr. Schutz and Actichem NeverStrip systems according to the substrate, wet conditions, appearance and cleaning needs. You do not need to choose a brand before contacting us. Premrest tests and recommends whichever solution works best.

Do you treat baths and bathroom floor tiles as well as showers?

Yes. The same assessment covers existing shower bases, baths and bathroom floor tiles. Each surface needs a compatible approach. A treatment suited to porcelain tiles may be unsuitable for an acrylic bath or an acid-sensitive stone.

Can you slip test before and after treatment?

Yes. Premrest can measure the existing surface with on-site pendulum testing to AS 4663, then retest after treatment. A product rating alone does not establish the performance of the finished surface. The installed surface and its ongoing cleaning matter.

Does this work suit older people and NDIS participants?

Yes. The service can suit older people, people with mobility or balance concerns, their families and carers, and NDIS participants who need their bathroom made safer. If you use an NDIS plan, talk to your plan manager or support coordinator about whether this work can sit in your plan. Premrest does not promise that the work will be funded.

How much does shower slip treatment cost?

Pricing depends on the area, material and condition, preparation, the selected system, access and any testing. Send the address, what needs treating and photos if you have them. We confirm scope and price before work begins.

How long will the bathroom be out of use?

Downtime depends on preparation, the selected treatment and its drying or curing requirements. Tell us how the bathroom is used and any access limits. We confirm the work sequence and when the area can return to use as part of the job plan.

Where do you offer shower slip treatment?

Across Australia. Crews work in Melbourne, Sydney and Brisbane. Perth and WA are by arrangement.

Request a shower slip treatment quote

Tell us the address, whether it is a shower, bath or bathroom floor, the surface if you know it, and any access notes. Photos help. Name, email, site address and details are required. We will recommend the next step and quote the appropriate solution.

By sending this enquiry, you are asking Premrest to contact you about it. Your details are sent to Premrest via Formspree. Privacy policy

Tell us which bathroom is slippery.

Include the address, whether it is a shower, bath or bathroom floor, and any access deadline. Share an existing test report if you have one.

Get a shower slip treatment quote

Call 1300 207 915 or text 0480 855 665 for urgent help or confirmation.

Using an AI assistant? See the Premrest AI connector guide for service enquiries.